Fully-detailed instructions for assembly and test of the PIC-EL Kit.
Section 12: INSTALLING FPP
This section deals with installing a software program onto your PC that will allow it to communicate with the PIC-EL board and serve as a tool to allow you to burn your new programs into the PIC chip.
This section actually is detailed out in Lesson 10 of the Elmer 160 course. Please download lesson 10 and follow the instructions provided by course instructor John McDonough to install "FPP".
When you come back to this manual in Section 13, we'll show you how to program your first PIC using the PIC-EL board.
Back to PIC-EL Manual Contents
Back to AmQRP Home Page
Page last updated: February 4, 2004